in

How to Fix PS4 Error SU-30746-0?

SU-30746-0

Here’s more information on why the SU-30746-0 comes in the PS4 and how to fix it. We will learn more about it here and it is very easy to fix.

So let’s go…

Sony Interactive Entertainment’s PlayStation 4 is one of the company’s most successful gaming consoles today. Also, as the days with PS4 go by, more and more people are joining the gaming community and the use of PS4 continues to gain more and more popularity. But after the recent update, many PS4 gamers are having trouble running their consoles. Many users are having trouble booting the console as per their reports. Failed to boot console. And shows SU-30746-0 error when logging in to PlayStation Network. We don’t have to worry about ps4 error SU-42118-6 as we saw earlier, SU-30746-0 error here is all the information about them and also the solution.

What is the error SU-30746-0?

When your console cannot find the appropriate firmware update file. Then PS4 error SU-30746-0 error message fixes the issue.

This error occurs when the PS4 is no longer updated, and the firmware version is no longer supported by Sony to run. When seen SU-30746-0 error.

Whenever you boot your PS4 console, you see the message on the black screen as shown below.

An error has occurred.

(SU-30746-0)

And in this screen, there is only one OK button below the error code. You have no other way to get out of the screen.

If you are experiencing this error on your console, continue to the troubleshooting section below.

How to Fix PS4 Error SU-30746-0?

1. Reboot the console from safe mode

  • 1: Turn off the system completely and leave it on for about a minute.
  • 2: Click and hold on to the power until it beeps 2 times then hold and hold.
  • 3: Connect the controller to the PS4 via your USB cable and click the PlayStation button to connect the controller.
  • 4: Once you have successfully connected your controller to the system, restart the console.
  • 5: Press X on the controller to reboot.
  • 6: When the console arrives, it will not show you the SU-30746-0 error code. If this happens try the following tip.

2. Update PS4 via Safe Mode

  • 1: Turn off the power of the system.
  • 2: Now, download the latest PS4 firmware version.
  • 3: Save the file to a USB drive, such as a USB disk or hard drive (you can skip this step if your console is connected to an Ethernet network).
  • 4: Press and hold the power button (until the console beeps twice).
  • 5: Connect your controller to PS4 via USB cable. In safe mode and press the PlayStation button to pair.
  • 6: Update the system software to select the option and press the X button on the controller.
  • 7: If you are using an Ethernet network, select the update using the Internet (if not, insert the USB with the downloaded firmware and select the update from the USB storage device option).
  • 8: Restart the PS4 console and confirm that the SU-30746-0 error code has been cleared.

3. Start the console through safe mode

  • 1: Turn off the console and leave it on for about a minute.
  • 2: Press and hold the power button and stop pressing the console twice after beeps.
  • 3: Connect your PS4 controller to the system using a USB cable and pair them by pressing the PlayStation button.
  • 4: Next, select Start PS4 (Reinstall System Software).
  • 5: Click the Yes button and hit X.
  • 6: Finally, restart the PS4 console.

4. Reinstall PS4 to default settings via Safe Mode

  • 1: Turn off your console completely.
  • 2: Next, press and hold the power button and wait until the system beeps twice.
  • 3: In safe mode, connect your PS4 controller using a USB cable.
  • 4: Press the PlayStation button to attach it to the console.
  • 5: Down scroll and select the Restore Default Settings option.
  • 6: Click the X button with yes, and this will restore the console to the default settings.

Leave a Reply

Your email address will not be published. Required fields are marked *

ps4-error-su-42118-6

PS4 Error SU-42118-6: How to Fix?

minecraft-bridge-ideas

Best 15 Minecraft Bridge ideas